NE-500 Programmable 
OEM Syringe Pump

OEM Syringe Pumps

NE-500
OEM
Syringe Pump
NE-4500 
Double OEM
Syringe Pump
Custom Designed
OEM
Syringe Pumps

 

NE-500 Programmable 
OEM Syringe Pump

Model: NE-500

 

NE-500 does not come with a power supply. Please see OEM Starter Kit and OEM Net below.

 

 

 

  • Computer controllable: networkable up to 100 pumps
  • Stand-alone operation: pre-program the pump with a dispensing program, then operate the pump from an attachedFoot Switch, button, or I/O controller
  • Add the OEM Starter Kit to run as a fully functional, stand-alone pump

Description:

  • Does not have a built-in user interface
  • Chassis mountable: 9 1/2"L x 4 1/4"W x 4 1/8"H (23.5 x 10.8 x 10.5 cm) (If chassis does not fit in your system, we makecustom designed OEM syringe pumps to accommodate your specification needs.)
  • Operates from a 12V DC power source
  • Holds 1 syringe up to 60 cc
  • Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
  • Includes all the advanced functions and programming features of the NE-1000 family
  • Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately
  • Download free pump terminal emulator or check out 
    Free 30-Day Trial of our Windows based SyringePumpPro
  • Custom modifications to the mechanics and firmware are also available
  • Download Brochure

Open chassis design easily mounts into your system

Features of the NE-1000 Family of Syringe Pumps:

  • Built for Automation
  • Operates from a computer
  • Infusion and withdrawal
  • Available in High Pressure, Stall Detection & Long Chassis options.
  • Set a single pumping rate and/or dispensing volume
  • Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, extra I/O expansion port, sound the buzzer
  • Network, control, and monitor up to 100 pumps with one computer
  • Motor stall detection available in NE-501 model ($550)
  • Dispensing accuracy of ± 1%
  • Unlimited lifetime technical support
  • Two year warranty

Example Flow Rates (NE-500, NE-501, NE-500L, NE-501L):

Syringe Size (cc)
Maximum Rate (mL/hr)
Minimum Rate (µL/hr)
0.5 µL 25.49 0.001
1 53.09 0.73
3 192.5 2.646
5 406.1 5.581
10 600 8.244
20 975.8 13.41
30 1282 17.63
60 2120 29.13
  • For a more complete list of flow rates, download brochure.
  • Need higher flow rates?Contact us. We have other models available.
Sample syringe configurations, can hold any size syringes below 60 cc.
 

 

NE-500 OEM Single Syringe Pump Models

Model
  Standard High Pressure Stall Detection Long Chassis Price
NE-500 X       $495.00
NE-501 X   X   $550.00
NE-510   X     $535.00
NE-511   X X   $590.00
NE-500L X     X $510.00
NE-501L X   X X $565.00
NE-510L   X   X $545.00
NE-511L   X X X $605.00

High Pressure

The NE-500 produces about 15 lbs of linear force at top speed and about 35 lbs at slow speeds. 10 ml/hr is an example of slow speed. The pressure that can be generated is relative to the syringe size. On a 60 ml syringe, this would roughly produce about 30 psi

The higher pressure versions will approximately double the pumping force at the same speeds.

Example Flow Rates (NE-510, NE-511, NE-510L, NE-511L):

Syringe Size (cc) Maximum Rate (mL/hr) Minimum Rate (µL/hr)
0.5 µL 91.83 0.001
1 mL 191.2 1.459
3 693.4 5.291
5 1462 11.17
10 2160 16.49
20 3514 26.82
30 4619 35.25
60 7635 58.26
  • For a more complete list of flow rates, download brochure.
  • Need higher flow rates?Contact us. We have other models available.


Stall Detection

Includes an optical encoder on the NE-500 that will detect and stop the motor during a stall. Typically used in high pressure applications where there is a risk of exceeding the maximum force specified. Without the optical encoder, the pump will continue to cog the event of a stall.


Long Chassis

Will hold and allow 140 ml syringe to open to its full length.



Do you need an upgrade for your Syringe Pump?

Model: FW-5-X

Price: call for details


Extra Features: X upgrade is Linear/Gradient flow rate ramping, additional advanced programming possibilities, and additional i/o functions, attach external switches, sub program selection structure, speed control switch interface

Model: FW-5-X2

Price: call for details


Extra Features: X2 upgrade includes all features of the X model plus increases the number of programmable phases from 41 to 340, and increases the max RS-232 baud rate to 38,400

OEM Starter Kit

back to top

Description:

  • Allows user to interactively communicate to the pump with a computer
  • Includes: power supplyPump-to-PC network cable (CBL-PC-7), user manual

MODEL: OEM-STARTER

Price: call for details


OEM Net

back to top
Power supply and secondary cable only. For use when networking two or more OEM NE-500 syringe pumps together. Must use the secondary cable in order to complete this application.

MODEL: OEM-NET

Price: call for details


Foot Switch

back to top

Description:

  • Start, stop, or trigger the next phase on your syringe pump
  • Attach to an NE-500 to allow stand-alone operation
  • Utilizes the TTL logic port on syringe pump
  • Quick and simple setup